Hyupshin Flanges & Fittings
                   
 
   HOME PAGE > BASIC REQUIREMENTS FOR MATERIAL AND FLANGE
Basic requirements for Material and Flange
Requirements are valid for normal situation, in special you have to contact us to introduce.
Material
Test basis / Requirements
Delivery Condition
 C 22.8 (1.0460)  DIN 17243: 01.87 + VdTUEV - WB 350/3: 2009
 DIN 17243: 01.87
 VdTÜV - WB 350/3: 2009
 +N
 P250GH (1.0460)  DIN EN 10222-2: 04.2000
  National Annex
 +N
 P245GH (1.0352)  EN 10222-2:1999-12 + AC : 2000-02
 +N
 A105N / C21  ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04
  + VdTUEV399/3: 1996-09
  + NACE MR 0175: 2000
 +N
 A105N  ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04
  + NACE MR 0175: 2000
 +N
 C21 (1.0432)  VdTUEV - WB 399/3: 1996-09
 +N
 RSt 37-2 (1.0038)  DIN 17100: 1980-01
 +N
 S235JR (1.0038)  DIN EN10025-2: 2005-04
 +N
 16Mo3 (1.5415)  DIN EN10222-2:1999-12 + AC:2000-02
 +N
 WStE355 / TStE355
  (1.0565 / 1.0566)
 DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06
 +N or QT
 P355NH  (1.0565)  DIN EN10222-4: 1998 + A1: 2002-12
 +N
 WStE355 / P355NH
  (1.0565)
 DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06
  + DIN EN10222-4: 1998 + A1: 2002-12
  + DIN EN17103 :1989-10
  + DIN EN10222-4: 1998 + A1: 2002-12
 +N or QT
 1.4301 (X5CrNi17-10)  DIN EN10222-5: 2000-02
 +AT
 1.4306 (X2CrNi19-11)  DIN 17440:1996-09
 +AT
 1.4401 (X5CrNiMo17-12-2)  DIN EN10222-5: 2000-02
 +AT
 1.4404 (X2CrNiMo17-12-2)  DIN EN10222-5: 2000-02
 +AT
 1.4432 (X2CrNiMo17-12-3)
 DIN EN10222-5: 2000-02
 +AT
 1.4541 (X6CrNiTi18-10)
 DIN EN10222-5: 2000-02
 +AT
 1.4571 (X6CrNiMoTi17-12-2)
 DIN EN10222-5: 2000-02
 +AT
 1.4541 / F321
 DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
 1.4571 / F316Ti  DIN EN10222-5: 2000-02 / +ASTM A 240
 +AT
 1.4404 / F316L
 DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
 1.4306 / F304L
 DIN 17440.1996-09 / +ASTM A 182/A 182M : 2005
 +AT
 1.4307 / F304L  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
Flange
Test basis / Requirements
 DIN, Carbon Steel
 DIN2519:1991-06
  + AD2000-W9: 02.04; -W13/ TRD107;TRB100;
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN, corrosion-resistant Steel
 DIN2519:1991-06
  + AD2000-W9: 02.04; -W2; -W10 / TRD107; TRB100;
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Carbon Steel
 DIN EN 1092-1: 2008-09
  + AD2000-W9; -W13/TRD107;TRB100
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Stainless Steel
 DIN EN 1092-1: 2008-09
  + AD2000-W9; -W2; -W10/ TRD107; TRB100
  + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 ANSI  ASME B16.5:2003
 ASME B16.47:2006
BACK       
  Copyrights 2001-2012 © eFlange.com All Rights Reserved. Home Page  |  ANSI  |  DIN  |  EN 1092-1  |  UNI  |  BS  |  SABS 1123  |  KS/JIS  |  GOST  |  AS  |  NS  |  ISO  |  VSM  |  GB  

Pipe Flange  |  Forged Flange  |  Carbon Steel Flange  |  Chinese Flange  |  myFlange.com